The JTECH-EX100M2 allows users to extend their full HD 1080P 60HZ audio video signal up to 328ft over a single CAT5e/6 cable. The extender also supports HDMI 1.4 and is HDCP 1.4 compliant to eliminate any content viewing restrictions. The built-in IR function allows users to control their source from the display’s location with ease. No more having to walk back and forth between the display and the source to change volume, channel etc.
The JTECH-EX100M2 can be used for a point – point connection, or a one – many connection. The TCP/IP ability of the extender allows for it to be ran through a network switch, where one transmitter and multiple receivers can be connected for one A/V signal to be distributed to multiple displays without any hassle.
- Supports up to 1080P 60Hz resolution up to 328ft. (100m)
- H.265 Encoding resulting in lower bandwidth usage while providing high image quality
- HDMI 1.4 | HDCP 1.4 Compliant
- Supports One – One or One – Many setup
- IR extension function to allow source device control from displays location
- Low power consumption, less than 2W
- Package Contents:
- (1) x Transmitter
- (1) x Receiver
- (2) x DC12V/1A Power Adapters
- (1) x IR TX Cable
- (1) x IR RX Cable
- (1) x User Manual
