Signal Processing Systems : Receivers & Transmitters : Linear - MGR-2

2-Channel Gate Receiver

Model: MGR-2

Part #: DNR00105

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1,000,000+ (MegaCode format)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver.

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1,000,000+ (MegaCode format)
RF frequency: 318 MHz

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 140 F
Operating Temperature (Minimum): -4 F
Impedance: 75 ohm
AC Voltage: 30 Volts
DC Voltage: 30 Volts
Depth: 1.50 in
Height: 5.25 in
Width: 3.63 in

Receiver 205137 kb - Data Sheet

Project List

Suggested Products

Transmitter/Receiver w/Bluetooth 4.1 Wireless Technology

by Vanco International

2.0 HDBaseT POC Receiver IR, RS-232 (compatible w/ EVMX4X3 & EVMX8X6 & EVMX44PRO & EVMX88PRO)

by Vanco International

Transmitter/Receiver w/Bluetooth 1.0 Wireless Technology

by Vanco International