Transformer: 120W transformer with tap selector switch mounted behind grille. Tap selections for 25V, 70V or 100V speaker systems, and 4 ohm (UL minimum) transformer bypass position
Enclosure: Factory-mounted enclosure ships attached to the driver (non-removable)
Durable 20gauge steel, painted grey
Ported enclosure is tuned for extended bass response
Self-contained, ready-to-install ceiling speaker (8 in. coaxial driver) produces excellent intelligibility for speech and full-frequency response for music—ideal for commercial or residential use.
Driver: 8" 120W coaxial driver
Transformer: 120W transformer with tap selector switch mounted behind grille. Tap selections for 25V, 70V or 100V speaker systems, and 4 ohm (UL minimum) transformer bypass position
Enclosure: Factory-mounted enclosure ships attached to the driver (non-removable)
Durable 20gauge steel, painted grey
Ported enclosure is tuned for extended bass response
Built-in reversible mounting dogs aid fast installation, while allowing the speaker to be mounted in drywall, wood, tile or almost any type of ceiling with thickness up to 3.4" (86.4mm)
Removable (4 pin) Phoenix-style connector with 2 terminals for input to speaker and 2 parallel terminals for output to next speaker in string
Internal volume = 900 cu.in
Baffle: Low-profile front baffle formed from UV-rated high impact plastic
Grille: Fine mesh press-fit grille (white) includes scrim and pull tool
Installation Aids: (included)
C-Ring: Reinforces the edge of drywall ceiling cut-outs and works with the support rails to uphold the weight of the speaker assembly
Support Rails (2): Rails are used with the C-ring to uphold the weight of the speaker assembly and help prevent sagging tiles when the speaker is installed in a lay-in tile ceiling
Template: Cardboard template is used to properly mark cut-outs for mounting holes
Paint Shield: Plastic shield fits over the driver to protect it if the baffle is to be painted
Installation Aids: (optional, order separately) ES-8-RIB Rough-in Bridge: For new construction (drywall or plaster ceiling) before finished ceiling is installed, the bridge serves as a placeholder for the speaker
Model #ES-82T includes:
8inch 120W coaxial driver
120W transformer
Metal enclosure (attached)
Press-fit grille, scrim, pull-tool
C-ring with support rails
Cardboard template for cut-outs
Paint shield for driver
Loudspeaker Mount Type - Ceiling
ROHS Compliant - Yes
Spec Sheet available - Yes
Speaker Diameter (Driver):
1.20 in
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
64 Hz
Minimum Frequency Response (Bandwidth):
0.06 kHz
Certifications:
UL, CSA
Impedance:
8 ohm
Maximum SPL (Sound Pressure Level):
110.80 dB
Sensitivity:
90 dB
Product Weight:
14.60 lbs
Shipping Weight:
43.70 lbs
Power Handling:
120W RMS (at 8 ohms) measured per EIA Standard RS-426B
Sensitivity:
90.0dB log average SPL (at 8 ohms) at 1W/1M over the frequency response range, measured in half-space
Maximum SPL:
110.8 dB (calculated based on power rating and measured 8 ohm sensitivity)
Impedance:
8ohms(nominal), 4.6ohms at 14kHz (min.)
Conical Dispersion Angle:
105degree conical at 2kHz octave (-6dB)