Now you can power SSP6 Multiducers using audio from your Dante network. Our PoE++ amps are single cable devices designed for use in small or medium zones, with no need for a local power outlet. They use a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs.
The PoE++LZ220 provides 2 channels at 20 watts each in 4 / 8 ohms (the SSP6 uses an 8 ohm load) while the CV140 provies 1 channel of 40 watts at 70V/100V. (To use the CV140 with your SSP6 Multiducer, you’ll need the RA-T1 transformer.)
Leverage the CAT5e/6 cable already in use throughout a facility to add speakers easily and quickly, with the ease of control and audio routing that your Dante network brings to the building.
- Quality - Both amps offer high efficiency, extremely low distortion and full frequency response to deliver rich, encompassing audio.
- Constant Voltage applications - Use the fast-wiring Euroblock’s 70 or 100V pins to bring your Dante® network audio to a speaker in your constant voltage system, with 40W of power.
- Simple impedance selection - Easily select 4 or 8 ohm speakers via a selector switch.
- Convenient - Plug-in Dante® connection provides low-latency audio and control with AES67 support. The amp uses a 60 watt port PoE++ feed or comparable injector.
